Remove AC power line. When connecting with wires onto connectors, please note that the black wire is Ground and should be connected to pin 1 Ground. It’s a community-based project which helps to repair anything. Click on Install and the program will begin to install the proper driver for your system. No part of this manual may be reproduced, transmitted or transcribed without the expressed written permission of the manufacturer and authors of this manual. After you had gone through the troubleshooting procedures, yet the problem still exists, or you find an evident damage on the motherboard.
|Date Added:||6 January 2015|
|File Size:||24.64 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
Match the heatsink clip with the socket mounting-lug. Pull the socket locking lever out from the socket and then raise the lever up to a degree angle.
Biostar GF7050-M2 motherboard BIOS – BIOGF7050M2
Installation Complete Follow the three steps to finish CPU, memory, and power installation, and the whole motherboard assembly should looks like this picture. The CMOS data becomes corrupted. On the other side, push the retention clip straight down to lock into the plastic lug on the retention frame, and then press down the locker util it stops.
If you do not properly set the motherboard settings, causing the motherboard to malfunction or fail, we cannot guarantee any responsibility. Copyright and Warranty Notice Step 6: Wait for five seconds. The illustration shows how to set up jumpers. Reset your desired password or clear the CMOS data.
Firmly plug the power supply cable into the connector and make sure it is secure. Remove the protection cap from the CPU socket and keep the cap gv7050-m2.
This document contains materials protected under International Copyright Laws. When connecting with wires onto connectors, please note that the black wire is Ground and should be connected to pin 1 Ground. How to get a quick response for my request on technical support?
BIOSTAR Gf7050-m2 Socket Am2 Motherboard Tested and Fully Operational
Look for the triangular cut edge on socket, and the golden dot on CPU should point forwards this triangular cut edge. You will see following window after you insert the CD. Hold the CPU down firmly, and then lower the lever to locked the position. Is the motherboard dead? Please click biostad YES to restart your computer.
After you installed your operating system, please insert the Fully Setup Driver CD into your optical drive and install the driver for better system performance.
It’s a community-based project which helps to repair anything. Place the heatsink and fan assembly onto the retention frame. No part of this manual may be reproduced, transmitted or transcribed without the expressed written permission of the manufacturer and authors of this manual.
BIOSTAR Group GFM2 – Geekbench Browser
Click on Driver to start the process of driver installation. Power on the AC. Align the pins to the connector and press firmly until seated. No warranty or representation, either expressed or implied, is made with respect to the quality, accuracy or fitness for any particular part of this document.
Download Biostar GFM2 motherboard BIOS – BIOGFM2 • Wim’s BIOS
Clear CMOS data The installation program will detect your system to find biostr the driver needed to be installed. Do not forget to connect the CPU fan connector. The information in this document is subject to change without notice and does not represent a commitment on part of the vendor, who assumes no liability or responsibility for any errors that may appear in this manual.
Normal Operation Step 1: The CPU will fit only in the correct orientation.
Hook the spring clip to the mounting-lug. Product names appearing in this manual are for identification purpose only and trademarks and product names or brand names appearing in this document are the property of their respective owners.